SPOF=NOREPORT, LPNS=NOT_PRGRMD_IN_NON_SECURE_STATE, EO=NOREPORT, SRTCR=NOREPORT, ESVD=NOREPORT, MCR=NOREPORT, SPON=NOREPORT, LPTA=NOREPORT, LVD=NOLOWVOLT, LPS=NOT_PRGRMD_IN_SECURE_OR_TRUSTED_STATE
SNVS_LP Status Register
| LPTA | LP Time Alarm 0 (NOREPORT): No time alarm interrupt occurred. 1 (REPORTED): A time alarm interrupt occurred. |
| SRTCR | Secure Real Time Counter Rollover 0 (NOREPORT): SRTC has not reached its maximum value. 1 (REPORTED): SRTC has reached its maximum value. |
| MCR | Monotonic Counter Rollover 0 (NOREPORT): MC has not reached its maximum value. 1 (REPORTED): MC has reached its maximum value. |
| LVD | Digital Low Voltage Event Detected 0 (NOLOWVOLT): No low voltage event detected. 1 (LOWVOLTDETECTED): Low voltage event is detected. |
| ESVD | External Security Violation Detected Indicates that a security violation is detected on one of the HP security violation ports 0 (NOREPORT): No external security violation. 1 (REPORTED): External security violation is detected. |
| EO | Emergency Off This bit is set when a power off is requested. 0 (NOREPORT): Emergency off was not detected. 1 (REPORTED): Emergency off was detected. |
| SPOF | Set Power Off The SPO bit is set when the power button is pressed longer than the configured debounce time 0 (NOREPORT): Set Power Off was not detected. 1 (REPORTED): Set Power Off was detected. |
| SPON | Set Power On The SPON bit is set when the set_pwr_on_irq interrupt is triggered, which happens when the power button is pressed longer than the configured debounce time 0 (NOREPORT): Set Power On Interrupt was not detected. 1 (REPORTED): Set Power On Interrupt was detected. |
| LPNS | LP Section is Non-Secured Indicates that LP section was provisioned/programmed in the non-secure state 0 (NOT_PRGRMD_IN_NON_SECURE_STATE): LP section was not programmed in the non-secure state. 1 (WAS_PRGRMD_IN_NON_SECURE_STATE): LP section was programmed in the non-secure state. |
| LPS | LP Section is Secured Indicates that the LP section is provisioned/programmed in the secure or trusted state 0 (NOT_PRGRMD_IN_SECURE_OR_TRUSTED_STATE): LP section was not programmed in secure or trusted state. 1 (WAS_PRGRMD_IN_SECURE_OR_TRUSTED_STATE): LP section was programmed in secure or trusted state. |